You have no items in your shopping cart.
Category Navigation:
Welcome to 4x4 outdoor tuning
You're currently on:Product DescriptionThis suspension kit covers the overall application field of the Defender. It has been further developed and optimized for more than 15 years. It is precisely aligned to the specifications of the Defender. The main difference to the standard springs is the progressive mode. The first millimeters of the compression travel are soft and adaptable, only after that the spring rate increases. The Defender from 1998 onwards is quite hard on the rear axle when it is empty due to the higher axle load and the drive-ability is not optimal. This suspension kit responses soft to this and generates better road-holding at a great travelling comfort. Better and softer response of the rear axle. The vehicle height remains the same. The improvement of the traveling comfort with this coil spring set is amazing. The standard front axle is very soft, this can cause difficulties to steer and the Defender is more likely to escalate. The spring rate of this kit is higher on the front axle. The road-holding is significantly increased due to the approximation of the spring rates on the front and rear axles. It is safer and more comfortable even in wet conditions. The Defender will be lifted at the front about 20mm and looks almost leveled because the rear is already higher. The vehicle total height remains the same. Made in Germany German TÜV 4 coil springs for Defender. Please note that these springs are very sensitive to weight distribution. You may need to fit 1 or 2 silencers/spacers 10 mm for height adjustment. You may also be interested in the following product(s)
|
4x4 Outdoor Tuning - Dirk Groening - Emerald Beach 2456 NSW - Australia - ABN: 28149480779 |
- Phone: +61 (0)448 886464 - info@4x4outdoortuning.com.au |
|