Nakatanenga Dyneema winch rope, 10 mm x 30 m, with winch hook.
Steel or synthetic? This was more or less a question of faith when it comes to winch ropes.
However, by now the trend is clearly in favour of the High-Performance-Synthetic Fiber which compared to steel is superior
in proportion to strength and weight and has an advantage in handling.
The top performer is Dyneema, an UHMWPE (Ultra-High-Molecular-Weight Polyethylen)
This material achieves the highest, weight-related strength of all synthetic fibers.
The two prime benefits versus steel are: Safety and Weight.
If a steel rope rips, then heavy sharp-edged metal lashes uncontrolled through the air, in the worst case at you or other people and can cause damage and severe injuries.
Should this new 2.3 kg light Dyneema rope really reach the 9.5 t breaking load, then the ends just drop to the ground.
Even if you just handle the steel rope you can get cuts through loose or damaged steel wires, it's not so with synthetic.
The much lighter Dyneema-rope not only relieves the operator but also the vehicle profits in the matter of statics and driving quality.
Dyneema-ropes are low-maintenance, washable, smooth to unroll and reel in due to only little friction.
Compared to other synthetic fibers, these fibres are tolerant against UV, Chemicals and oil, as well as against abrasion and material fatigue through kinks.
These fibres absorb hardly any water and are extreme flexible with only 5% stretch in length.
The high-quality workmanship reflects in the detail:
A highly compressed braided Kernmantel/cover protects the inside fibres from abrasion, dirt and damage and increases haptic qualities and durability many times over.
The 12 mm cable eye stiffener is made of stainless steel, as well as the 7 mm eyelet. Additional protection against abrasion and frictional heat through polyester-grommets on both rope ends. Hot shrink sealed to prevent abrasion or unravelling on the splicing.
The Nakatanenga winch rope is available in grey or orange.
Technical data:
Material: Dyneema, UHMWPE
Dimension: 10 mm x 30 m
Weight: 2.3 kg
Breaking load: 9.5t
Number of fibres: 12 inside, 24 outside
Length stretch: 5.2%
The industrial hook
extra large radius
large opening of the hook
tough hook gate cast
can be taken apart
weight 0.750 kg
pulling force 10,000 lbs
minimum breaking load 8,000 kg
Material: alloyed, hardened and tempered steel grade 8, painted yellow.
Suitable for steel and synthetic ropes, with or without rope thimble.
Ropes can be fitted without splicing.
