Built-in socket 12V, loadable up to 15A, with cover cap

The socket can either be fitted directly into the dash board, cubby box, cupboard etc. or in a surface mounted housing (single, dual, triple).
Please ensure adequate fusing.

The socket can also be fitted in the 29 mm hole of the standard cigar lighter in many vehicles

Dual USB socket round, with blue light - 2 x 2.1A charging current, with cover cap.
The socket can either be fitted directly into the dash board, cubby box, cupboard etc. or in a surface mounted housing (single, dual, triple).
Please ensure adequate fusing.

The socket can also be fitted in the 29 mm hole of the standard cigar lighter in many vehicles.

This Land Rover USB Port fits in the original switch openings in the dash board of the Land Rover Defender TD5 (2002-2006) and Tdci/Puma (2007-2016)
The port / socket has a green background light to match the original Land Rover look.
It comes with a mini cable harness to enable two-wire installation.

A multi-jack is fitted into the back of the USB port to enable easy removal. The included wiring harness has a prewired inline fuse.

USB 3.0
1 USB port with cable harness and fitting instruction

Switch cap OEM Style for Land Rover.
This is the cap only.
Price is per switch cap.
Please choose your switch cap:

Headlight switch for Land Rover Defender Td5/Td4 
for all models from (VIN) VA104806 to EA999999

Protection cover for the Power Port, suitable for PowerSystem and PowerSystem Pro 12V and 24V
Protects the Power Port socket when not in use, easy installation.

Magnetic plug system for 12 V, consisting of PowerPort connection and PowerClip plug - water and dust resistant - therefore ideal for off-roaders! Magnets both in the PowerPort (current generator) and in the PowerClip (pickup) contact the two components and also have a switch function. Therefore, the flat contacts of the PowerPort are only energized when the moving magnetic plate in the encoder is switched by a suitable consumer. Other metallic objects or magnets cannot trigger the switching process. Thus, a MagCode PowerSystem is 100% short-circuit proof. A hinged PowerPort cover is available as an option.

The MagCode system can be used for a variety of applications that require secure but easily detachable power connections - whether it's the cool box in the off-roader or the battery charger - also headlights on the roof rack or the power supply in the roof tent can be powered with this elegantly.

Technical specifications:
Locking: magnetic and mechanic
Connection PowerPower: 6.3 mm flat contact for plugging or soldering
PowerClip connection: screw connection, max. 2.5 mm² cable
Installation diameter PowerPort: 28 mm (M28)
Projection PowerClip: 21.5 mm
Voltage range: 12 volts or 24 volts
Load capacity: max. 25 amps (at +70°C)
Port Cable Length: 72mm
Dust and water resistance:
PowerPort front (built-in): IP5K9K
PowerPort connection side: IP5K0
PowerClip (not connected): IP40
PowerClip (on port): IP42
Switching cycles (no load): over 10,000
Switching cycles (under load): 4,000

The PowerSystem Pro, on the other hand, has a bayonet lock in addition to the magnetic lock and a load capacity of 25 A instead of 15 A. Both systems are available for 12 V and 24 V.
A connection cable for the MagCode PowerClip is not included in the delivery.

Magnets in the PowerPort (current sensor) and in the PowerClip (consumer) contact both components and have an additional switch function.
Thus the flat electrical contacts in the PowerPorts are only energized once the movable magnets in the sensor are switched on by a suitable consumer.
Other metal objects or magnets can't switch it on.
This technique makes the MagCode Pro PowerSystem 100 % short circuit protected.
The MagCode Pro System can be used for many different applications by which a safe and easy power connection important is, such as a fridge in your 4WD or a battery charger as well as a flood light on your roof rack or the power supply in your roof tent. This is a modern and elegant way.

Magnets in the PowerPort (current sensor) and in the PowerClip (consumer) contact both components and have an additional switch function.
Thus the flat electrical contacts in the PowerPorts are only energized once the movable magnets in the sensor are switched on by a suitable consumer.
Other metal objects or magnets can't switch it on.
This technique makes the MagCode Pro PowerSystem 100 % short circuit protected.
The MagCode Pro System can be used for many different applications by which a safe and easy power connection important is, such as a fridge in your 4WD or a battery charger as well as a flood light on your roof rack or the power supply in your roof tent. This is a modern and elegant way.

Technical Data:

Locking: magnetic
Connection PowerPower: 6.3mm flat electrical terminal to plug or solder
Connection PowerClip: screwing, max. 2.5mm² cable
Assembly diameter PowerPort: 28mm (M28)
Projection PowerClip: 21.5mm
Voltage: 12V (also available for 24V)
Load capacity: max. 15A (at +70°C)

Dust and Waterproofness:

PowerPort front (fitted): IP 5K9K
PowerPort terminal side: IP 5K0
PowerClip (not connected): IP 40
PowerClip (Port): IP 42
Switching cycle (at no-load): over 10,000
Switching cycle (under load): 4000