This storage box is fitted in the left rear wing, provides a plus on storage space and is accessible from the outside.
Ideal for recovery gear, tools, gumboots etc.
The box is made of stainless steel, waterproof and lockable.

The lid is connected with 2 thin steelropes and when open the lid is at a 90^o angle which turns it into a convenient table.

For Land Rover Defender 110 from MY 1992, Tdi, Td5, Td4.

The box is 355mm x 27mm x 340 mm, stainless steel
The lid is stainless steel black powder coated in RAL9005 matt.

The box comes with 2 keys and all fitting material.

More

The wing storage box is a direct replacement for the plastic lid on the wing for Land Rover Defender. 
The bottom plate is loose to be able to fit switches, plugs, air connection, winch electric etc. 
The hinge is rolled-on with a special tool and connected with a 4mm stainless steel pin. 
The lock is made by the renown EMKA and comes with 2 keys. The lock is protected by a lid.

1 wing storage box with 2 keys.
available for LHD and RHD, please choose:

More

Wheel Nut black for Alloy wheels for Land Rover Defender to 2016 
Special surface treatment that appears black for long lasting protection. The nuts are not painted.

1 wheel nut for alloy rim

More

Wheel nut set of 23, galvanized and passivated black, for Land Rover steel rims and other.
You need these wheel nuts if you change from aluminium rim to steel rim. 
The black coloured wheel nuts fit perfectly for example with the Wolf-, Dotz- or Sunraysia steel rims.
Among others these wheel nuts are suitable for the following vehicles:
Land Rover Defender 90
Land Rover Defender 110
Land Rover Defender 130
Land Rover Series 2
Land Rover Series 3
Land Rover Discovery 1
Range Rover Classic
OEM article number of the wheel nut is RRD500010
The wheel nuts are refined by a specialised company in Germany. The treatment is made of 2 x Zintek 300B and Zintek Top and then with Techseal Black SL28 black passivated.

Set of 23 black wheel nuts for steel rims.

More

Nakatanenga ANR CLASSIC Steel rim 8x16" for Land Rover Defender.

The ANR CLASSIC 8x16 not only for heritage fans! Exclusively made and suitable for most Defender up to MY 2016.

Classic design, diverse in action, strong in performance. The ANR Classic 8x16 enhances the Look of the Defender.
The rims are powder coated in black or white, also primed available.
The offset ET0 ensures a subtle wider track and the choice of suitable tyres guarantees a large variety in options regarding the performance.

Price per rim 
These rims are not suitable for the use of wheel spacers due to the maximum offset.

Please check the long description for details

More

Set of 4 TREKFINDER wheel arch flare extension for Land Rover Defender 20mm wide x 1500mm long
This is a subtle additional wheel arch flare extension of 20 mm with easy stick on fitting.
You can cut it to the required length by using a Stanley knife and sand paper.
Easy traceless removal possible.
Black high quality rubber - flexible and tough.

More

Often the wheel arch flares are too small for the Land Rover Defender. This extension gives you a cover of +30mm.
The material is very flexible which makes the fitting easier. The 30 mm extension also suits bigger tyres.
A traceless removal is also possible.

Please note:
For the front you need the inner part of your old wheel arch flares (marked in white lines on the photo) and one additional hole needs to be drilled.

Available for the front or rear or front and rear. Please choose.
The flares are paintable.

The rear wheel arch flares are not suitable for Defender with Tray (HCPU version)
On the photo you see the Defender with 285/75R16 tyre on Hutchinson Pinzgauer rim 7.5x16 ET63 with wheel spacer (65mm)

You can add the Trekfinder extension to this wheel arch flare.

More

This D-Fender is a splash guard which lines up with the standard plastic fender extension. These D-Fenders protect the vehicle against dirt and scratches in the region of the front doors.

Not suitable for vehicles with rock sliders. Further they are not designated for sills with checker plate but it might be possible to fit them with slight modifications.

1 pair of D-Fender with fitting material.
The D-Fenders are available with smooth or textured surface. Smooth is ideal for coating. More

Nakatanenga Rear ladder for Land Rover Defender 90/110, made of aluminium in silver or powder coated black

This neat looking and resistant rear ladder is a very useful aid to reach the roof of your Land Rover Defender.  
The steps are grippy. 

1 Ladder with fitting material

More