TREKFINDER wheel arch flare extension for INEOS Grenadier 35mm x 1500mm

TREKFINDER Universal Fender/Wheel Arch Flare Extensions for INEOS Grenadier 35 mm x 1500 mm

- Affordable and Flexible: Cost-effective and adaptable for various uses.
- Durable Material: Constructed from tough black rubber for long-lasting use.
- Ideal for Multiple Applications: Suitable for wheel spacers, distance discs, and other modifications. Appropriate for required approvals or off-road use.
- Installation Details: Secure the extensions under the bodywork edge along the wheel arches. Remove the adhesive backing and apply firmly to a clean surface. For rigorous off-road conditions, additional screw fixation is advised.
- Dimensions: Total width is 51 millimeters, with 16 millimeters for mounting and approximately 35 millimeters extending outward to cover the tires.

- Package Includes:
4 x 150 cm long TREKFINDER fender extensions, including screws
1 x  TÜV® certification report,
1 x  type plate,
1 x  installation manual,
1 x  photo sheet.

- Important Installation Notes: The mounting surface must be smooth, rust-free, clean, and degreased. During and 24 hours after installation, the ambient and component temperatures should be at least 20°C. Apply the extension with high pressure for about 1 minute after removing the 3M tape. Use a sharp carpet knife to trim the extension ends for your vehicle's look. Let the vehicle rest for at least 24 hours post-installation, 48 hours for optimal bonding. Avoid washing the vehicle within this period. Additional steps may be necessary if installation guidelines are not met.