Front axle protection TREKFINDER for Suzuki Jimny 2 GJ + HJ 
The front axle protection is fitted to the existing mounting points and offers complete axle protection.
Made of 5 mm steel which galvanized in yellow. 

1 front axle protection including fitting material

TREKFINDER Rear axle protection for Suzuki Jimny 2 GJ from October 2018
The rear axle protection is fitted to the existing mounting points and offers complete axle protection.
Made of 5 mm steel, galvanized in yellow.
Very tough and flat heavy duty version

1 rear axle protection 

TREKFINDER Protection for catalytic exhaust converter for SUZUKI Jimny 2 GJ + HJ
Made from 3 mm steel, anodized in yellow.

1 underbody guard, incl fitting material

Nakatanenga front door air vent for Suzuki Jimny 2 (GJ) for parking only.

These door air vents enable good air circulation just as with slightly opened windows and yet there is no higher risk of rainwater entering the car or theft than with closed windows.
With the new fly-screen attached it also protects against insects entering your car through the windows.
Simple fitting: crank down the window, insert the air vent and wind up the window again until it's tight. Done

Ideal for camping.
Air vents in front doors are not permitted for driving. ONLY use when car is parked.
One pair of air vents black powder coated with fly screen.

CargoBear 2.0, the newest generation of roof racks.

All CargoBear accessories are suitable for this new roof rack CargoBear 2.0

Exclusively made in Germany from Aluminium-Magnesium Alloy with high-end powder coated finish. The system can be taken apart completely and it is endlessly flexible!

It is the flattest roof rack on the market.

The beams are designed to work with the movement of the vehicle despite the high stability.
They are not stiff which prevents the gutter or roof to get damaged. 
This is a significant advantage compared to roof racks which seat on the gutter over the entire length.

The rack contains incorporated lashing rails to enable the fastening of the cargo wherever you need it. 

Whether you need a roof rack in full length or only a short platform, the CargoBear 2.0  is an optimal reconcilable system.

All parts of the racks are available as spare parts, also perfect for individual solutions!

Material: Aluminium-Magnesium-Alloy (AIMg3)

Coating: RAL 9005 black

usable Width: 1313mm floorspace
Dimension: w 1346 mm x l 1596 mm (1792 mm with draught-stop and end beam)

CargoBear 2.0 crossbeam for Suzuki Jimny 2
The beams are exclusively made in Germany from Aluminium-Magnesium Alloy with high-end powder coated finish.

If you don't need a whole roof rack because you only want to mount for example a roof tent, then this CargoBear crossbeam is optimal for you. 

This crossbeam is equivalent to the crossbeams of the CargoBear roof racks thus all their benefits apply to this crossbeam:

Material: lightweight Aluminium-Magnesium-Alloy (AIMg3)

Coating: RAL 9005 black,
Usable width: 1313 mm
Width: 1346 mm
Made in Germany
Every component available as spare part

CargoBear 2.0 Draught-stop / light bracket for Suzuki Jimny 2, GJ 

Material: Aluminium-Magnesium-Alloy (AIMg3)
black powder coating

1 piece (without lights)
including fitting material

(the light brackets fit Light bars Osram SX180 or SX300)

CargoBear awning brackets in black powder coated to fit an awning on the Jimny 2 CargoBear roof rack.

Among others the brackets are suitable for the following awning models:

RoofLodge Awnings
RhinoRack Foxwing
RhinoRack SunSeeker

You need to have at least 2 CargoBear crossbeams installed to fit an awning. 
The set contains 4 parts and mounting material for the brackets to fit on the Jimny 2 CargoBear roof rack. 
The fitting material for the awning itself is not inlcuded.