horntools Rock Slider left and right for Suzuki Jimny GJ 
Closely spaced rock slider made from Aluminium powder coated black, with steel mounts
The sliders have pressed in dimple dies to increase the rigidity 
Direct replacement for the original plastic door sill cover 
The slider panel can be exchanged in case of damage as long as the substructure is not damaged.
The rock sliders also protect the sill seam.
Precisely fitting.
Weight 4.5 kg each slider

left and right rock slider, including mounting material and fitting instruction

After the great response to the J-01 wheel, the second original design was done differently. We introduce you to the HIGH PEAK J-02. While the J-01 offers a classic design with a deep lip, the J-02 features a concave seven-spoke design reminiscent of off-road motorsport. Specific to the Suzuki Jimny JB74 (2018+, referred to as 'GJ' & 'HJ' in EU) TÜV type-approved and tested for strength. Also compatible with JB43 (1998-2018) models Made in Italy.
Guaranteed European quality, fit with standard or lift kit. No additional modifications required (depending on tire size)
Diameter: 15
Width: 6
ET: -5
Bore / PCD: 5x139.7
Finish: anthracite or vintage white
Weight: 9.2kg
Vehicle: Suzuki Jimny II GJ/HJ

1 piece alloy rim for Suzuki Jimny II GJ/HJ

The High Peak J-01 alloy wheel is available in three different colors in a retro style. The robust rim is perfect for modern off-road vehicles. Specially for the Suzuki Jimny GJ/HJ, TÜV approved and tested for strength. Also compatible with JB43 (1998-2018) models. Can be bolted on with standard height or lift kit. No additional modifications required (depending on tire size) With TÜV parts certificate for Suzuki Jimny II GJ/HJ
Diameter: 16
Width: 6
ET: -5
Bore / PCD : 5x139.7
Finish: matt black, matt anthracite or vintage white
Weight: 9.2kg
Vehicle: Suzuki Jimny II GJ/HJ

1 piece alloy rim for Suzuki Jimny II GJ/HJ

Spring distance ring/spacer/trim packer/lifting ring TREKFINDER for SUZUKI Jimny I & II
+ 10 millimeters in red - for lifting the front and/or rear axle
Suitable for all Jimny models,  front and rear axle
Jimny II Type GJ & HJ from MY 2018
Jimny I type FJ to MY 2018
for the front axle spring
for the rear axle spring
+ 10 millimeters lift
1 x spring distance ring +10 mm, red

Upgrade your Suzuki Jimny GEN2 1.5L with the POWERspec clutch kit -
the ultimate performance upgrade for towing, hauling heavy loads, and off-roading.
With a heavy-duty clutch disc, high contact pressure, and no noticeable increase in pedal pressure, this kit is unbeatable in reliability and driving characteristics.

Perfect for vehicles with Stage2 map tuning / trailer operation / off-roading
1x LOF Heavy Duty clutch disc, with organically bonded clutch lining and high coefficient of friction (0.4μ)
1x LOF HD POWERspec clutch cover, +40% contact pressure compared to the original
1x LOF HD release bearing
6x clutch cover bolts coated with Loctite
1x Jimny pilot/trunnion bearing
1x Clutch Alignment Tool by LOF
10ml lubricating grease for the teeth

TREKFINDER steering damper reinforced for SUZUKI Jimny II from 2018 type GJ & HJ
This reinforced steering damper reduces, prevents and reliably eliminates steering wheel vibrations in/on your Jimny
if all attempts and efforts such as balancing wheels, adjusting track, correcting caster, replacing wheel and knuckle bearings, didn't lead to success........this steering damper will definitely help you
the extremely easy installation of the steering damper is via plug and play

Upgrade your Suzuki Jimny 2 with our Tailgate Damper by Nakatanenga! Effortlessly open and securely hold your tailgate, even on uneven terrain. Easy plug-and-play installation, no vehicle modifications needed. Enjoy extended opening and hassle-free access to your cargo space. Enhance your off-road experience!

Nakatanenga Car boot shelf for Suzuki Jimny 2 GJ
Made of aluminium powder coated in black, the flat part is 985mm x 600mm.
The shelf has airline slots to secure the load.
Fits to existing mounting points. No need to drill holes.
Payload max. 50 kg
Weight 6.6 kg.

1 shelf with fitting material

Nakatanenga seat covers in black, coyote or olive green, as single seat covers or sets for Suzuki Jimny 2 GJ. Suitable for Airbag.
High quality precisely fitting seat covers made of 100% Nylon. Easy to clean.
The covers have big zipper pockets at the back as well as MOLLE lasercut for your other MOLLE pockets such as the first aid pocket.
The seat covers are made of 100% Nylon which is extremely sturdy and durable.

Please choose your covers further below.

Product specification:
big zipper pocket at the back
Velcro for perfect fit
Lasercut MOLLE system at the back to attach MOLLE pockets
precise fit, no slipping
extremely sturdy
material: 1000D Nylon 
washable 30°-60° C